Weed Weapon Eliminate 25KG

Active Ingredients

600g / kg Metsulfuron–methyl in the form of a water dispersible granule.

Available Sizes

• 25kg (SKU: G32350)

*Please contact us if you are interested in purchasing larger sizes than listed here.

Regulations

HSNO Approval Code: HSR000242

Weed Weapon Eliminate SDS

1. Apply product according to the equipment usage.
   1. Knapsack and Handgun application: Use 10 – 15mL of the product per 10 litres of water. Ensure full coverage of leaves and stem.
   2. Boom spraying: Application can be made in spray volumes up to 400L / ha using fan nozzles at pressures in the range of 200 – 280 kPa. Boom height should be set so a double overlap of nozzle pattern is achieved at the top of the target plants.
   3. Aerial: Forest and non–crop areas. Can be applied by aircraft in spray volumes of up to 400L / ha. Always use Weed Weapon Penetrant OS or an equivalent organosilicone when indicated on the Weeds Controlled Table (see label) at the rates recommended. Increase spray volumes in hilly terrain to ensure maximum target contact. Do not use near cropping or farm areas.
   4. Wiper: Pre–mix 1g of the product per litre of clean water. Ensure wipers are wet before starting application. Mix only enough for immediate use. Plants must be clean and dry and the wiper fully saturated. Apply up and down slopes for effective applications. For high weed density, reduce speed and apply twice in opposite directions.
   5. Stump swabbing: Mix 5g of the product per litre of water and using a brush or knapsack, liberally apply to freshly cut stumps as close as possible to the ground.
   6. Stem injection: Mix 20g of the product per litre of water and inject 2mL of solution into holes or cuts made at 10cm intervals around the stem of the tree.
   7. Forestry prior to planting: Use only as a pre–plant treatment not less than 2 months prior to planting. Use 170g per hectare to control bracken, blackberry, and seedling gorse. Use within the 2 month pre–planting interval will result in damage to the pine trees. Use Weed Weapon Penetrant OS or an equivalent organosilicone at 100mL per 100 litres of water or as specified in the Weeds Controlled Table (see label).

Download label.

• Read instructions thoroughly before use.
• Please follow cautionary labels and safety instructions located on the product packaging / label.

HAZARD (GHS) Classification: Eye Irrit. 2; Aquatic Acute / Chronic 1. Haz. to soil organisms.

Download label.

Weed Weapon Eliminate SDS

• Read instructions thoroughly before use and retain instructions label for future reference.
• This product is compatible with commonly used herbicides.
• This product must only be applied in equipment made from stainless steel, fibreglass, plastic, aluminium, brass, or copper. All spray equipment including pumps, spray tanks, lines and nozzles, and landing gear of aircraft should be thoroughly washed with water after each day spraying.
• Do not apply to crops. This product must not be used on plants intended to produce food for consumption by humans or animals. This product must not be applied in areas that may be grazed by food–producing animals.
• Do not apply to lawns, walkways, driveways, tennis courts and similar areas.
• Do not allow spray drift outside the target area. This product must be under the control of a Certified Handler or other qualified operator when applied using other than hand–held equipment.